? semiconductor components industries, llc, 2014 july, 2014 ? rev. 3 1 publication order number: dtc113ep/d mun5330dw1, nsbc113epdxv6 complementary bias resistor transistors r1 = 1 k , r2 = 1 k npn and pnp transistors with monolithic bias resistor network this series of digital transistors is designed to replace a single device and its external resistor bias network. the bias resistor transistor (brt) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. the brt eliminates these individual components by integrating them into a single device. the use of a brt can reduce both system cost and board space. features ? simplifies circuit design ? reduces board space ? reduces component count ? s and nsv prefix for automotive and other applications requiring unique site and control change requirements; aec?q101 qualified and ppap capable ? these devices are pb-free, halogen free/bfr free and are rohs compliant maximum ratings (t a = 25 c both polarities q 1 (pnp) & q 2 (npn), unless otherwise noted) rating symbol max unit collector-base voltage v cbo 50 vdc collector-emitter voltage v ceo 50 vdc collector current ? continuous i c 100 madc input forward voltage v in(fwd) 10 vdc input reverse voltage v in(rev) 10 vdc stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. http://onsemi.com marking diagrams pin connections 30 m 1 6 30 m 1 30 = specific device code m = date code* = pb-free package (note: microdot may be in either location) *date code orientation may vary depending upon manufacturing location. sot?363 case 419b sot?563 case 463a q 1 q 2 (1) (2) (3) (6) (5) (4) r 1 r 2 r 2 r 1 device package shipping ? ordering information mun5330dw1t1g smun5330dw1t1g sot?363 (pb?free) 3000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specification s brochure, brd8011/d. NSBC113EPDXV6T1G sot?563 (pb?free) 4000 / tape & reel 1
mun5330dw1, nsbc113epdxv6 http://onsemi.com 2 thermal characteristics characteristic symbol max unit mun5330dw1 (sot?363) one junction heated total device dissipation t a = 25 c (note 1) (note 2) derate above 25 c (note 1) (note 2) p d 187 256 1.5 2.0 mw mw/ c thermal resistance, (note 1) junction to ambient (note 2) r ja 670 490 c/w mun5330dw1 (sot?363) both junction heated (note 3) total device dissipation t a = 25 c (note 1) (note 2) derate above 25 c (note 1) (note 2) p d 250 385 2.0 3.0 mw mw/ c thermal resistance, junction to ambient (note 1) (note 2) r ja 493 325 c/w thermal resistance, junction to lead (note 1) (note 2) r jl 188 208 c/w junction and storage temperature range t j , t stg ?55 to +150 c nsbc113epdxv6 (sot?563) one junction heated total device dissipation t a = 25 c (note 1) derate above 25 c (note 1) p d 357 2.9 mw mw/ c thermal resistance, junction to ambient (note 1) r ja 350 c/w nsbc113epdxv6 (sot?563) both junction heated (note 3) total device dissipation t a = 25 c (note 1) derate above 25 c (note 1) p d 500 4.0 mw mw/ c thermal resistance, junction to ambient (note 1) r ja 250 c/w junction and storage temperature range t j , t stg ?55 to +150 c 1. fr?4 @ minimum pad. 2. fr?4 @ 1.0 1.0 inch pad. 3. both junction heated values assume total power is sum of two equally powered channels.
mun5330dw1, nsbc113epdxv6 http://onsemi.com 3 electrical characteristics (t a =25 c both polarities q 1 (pnp) & q 2 (npn), unless otherwise noted) characteristic symbol min typ max unit off characteristics collector-base cutoff current (v cb =50v, i e =0) i cbo ? ? 100 nadc collector-emitter cutoff current (v ce =50v, i b =0) i ceo ? ? 500 nadc emitter-base cutoff current (v eb = 6.0 v, i c =0) i ebo ? ? 4.3 madc collector-base breakdown voltage (i c =10 a, i e =0) v (br)cbo 50 ? ? vdc collector-emitter breakdown voltage (note 4) (i c = 2.0 ma, i b =0) v (br)ceo 50 ? ? vdc on characteristics dc current gain (note 4) (i c = 5.0 ma, v ce =10v) h fe 3.0 5.0 ? collector-emitter saturation voltage (note 4) (i c = 10 ma, i b = 5.0 ma) v ce(sat) ? ? 0.25 v input voltage (off) (v ce = 5.0 v, i c = 100 a) (npn) (v ce = 5.0 v, i c = 100 a) (pnp) v i(off) ? ? 1.2 1.3 ? ? vdc input voltage (on) (v ce = 0.2 v, i c = 20 ma) (npn) (v ce = 0.2 v, i c = 20 ma) (pnp) v i(on) ? ? 1.7 1.7 ? ? vdc output voltage (on) (v cc = 5.0 v, v b = 2.5 v, r l = 1.0 k ) v ol ? ? 0.2 vdc output voltage (off) (v cc = 5.0 v, v b = 0.05 v, r l = 1.0 k ) v oh 4.9 ? ? vdc input resistor r1 0.7 1.0 1.3 k resistor ratio r 1 /r 2 0.8 1.0 1.2 product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. 4. pulsed condition: pulse width = 300 ms, duty cycle 2%. figure 1. derating curve ambient temperature ( c) 125 100 75 50 25 0 ?25 ?50 0 50 100 150 200 250 300 p d , power dissipation (mw) 150 (1) (2) (1) sot?363; 1.0 1.0 inch pad (2) sot?563; minimum pad 350 400
mun5330dw1, nsbc113epdxv6 http://onsemi.com 4 typical characteristics ? npn transistor mun5330dw1, nsbc113epdxv6 figure 2. v ce(sat) vs. i c 10 02030 i c , collector current (ma) 100 1 0.1 40 50 figure 3. dc current gain figure 4. output capacitance 10 1 0.1 0.01 010 40 50 i c , collector current (ma) 100 10 0.1 11010 0 i c , collector current (ma) figure 5. output current vs. input voltage 100 10 1 0.1 0 0.5 v in , input voltage (v) figure 6. input voltage vs. output current 50 010 203040 3.6 2.8 0.4 1.2 0 v r , reverse voltage (v) 30 v ce(sat) , collector?emitter voltage (v) i c /i b = 10 150 c 25 c v ce = 10 v 25 c h fe , dc current gain f = 10 khz i e = 0 a t a = 25 c 0.8 1.6 2.0 2.4 3.2 c ob , output capacitance (pf) v o = 5 v i c , collector current (ma) v o = 0.2 v v in , input voltage (v) 20 ?55 c 1 0.1 150 c ?55 c 25 c 150 c ?55 c 1.0 1.5 2.0 2.5 3.0 150 c 25 c ?55 c 10
mun5330dw1, nsbc113epdxv6 http://onsemi.com 5 typical characteristics ? pnp transistor i c , collector current (ma) v ce(sat) , collector?emitter voltage (v) 10 1 0.1 0.01 050 10 20 30 40 figure 7. v ce(sat) vs. i c t a = 150 c t a = ?55 c t a = 25 c i c /i b = 10 i c , collector current (ma) h fe , dc current gain 100 0.1 100 110 figure 8. dc current gain t a = 150 c t a = ?55 c t a = 25 c v ce = 10 v v in , input voltage (v) i c , collector current (ma) 100 0 2.5 0.5 1 1.5 2 figure 9. output current vs. input voltage v o = 5 v t a = 25 c t a = ?55 c t a = 150 c 10 1 0.1 i c , collector current (ma) v in , input voltage (v) 050 30 40 figure 10. input voltage vs. output current 10 20 t a = 25 c t a = 150 c t a = ?55 c v o = 0.2 v 100 10 1 0.1 v r , reverse voltage (v) c ob , output capacitance (pf) 12 010203040 figure 11. output capacitance 10 8 6 4 2 0 5152535 f = 10 khz i e = 0 v t a = 25 c 10 1 0.1
mun5330dw1, nsbc113epdxv6 http://onsemi.com 6 package dimensions sc?88/sc70?6/sot?363 case 419b?02 issue y notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimensions d and e1 do not include mold flash, protrusions, or gate burrs. mold flash, protru- sions, or gate burrs shall not exceed 0.20 per end. 4. dimensions d and e1 at the outermost extremes of the plastic body and datum h. 5. datums a and b are determined at datum h. 6. dimensions b and c apply to the flat section of the lead between 0.08 and 0.15 from the tip. 7. dimension b does not include dambar protrusion. allowable dambar protrusion shall be 0.08 total in excess of dimension b at maximum material condi- tion. the dambar cannot be located on the lower radius of the foot. c ddd m 123 a1 a c 654 e b 6x dim min nom max millimeters a ??? ??? 1.10 a1 0.00 ??? 0.10 ddd b 0.15 0.20 0.25 c 0.08 0.15 0.22 d 1.80 2.00 2.20 ??? ??? 0.043 0.000 ??? 0.004 0.006 0.008 0.010 0.003 0.006 0.009 0.070 0.078 0.086 min nom max inches 0.10 0.004 e1 1.15 1.25 1.35 e 0.65 bsc l 0.26 0.36 0.46 2.00 2.10 2.20 0.045 0.049 0.053 0.026 bsc 0.010 0.014 0.018 0.078 0.082 0.086 *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 0.65 0.66 6x dimensions: millimeters 0.30 pitch 2.50 6x recommended top view side view end view bbb h b seating plane detail a e a2 0.70 0.90 1.00 0.027 0.035 0.039 l2 0.15 bsc 0.006 bsc aaa 0.15 0.006 bbb 0.30 0.012 ccc 0.10 0.004 a-b d aaa c 2x 3 tips d e1 d e a 2x aaa h d 2x d l plane detail a h gage l2 c ccc c a2 6x
mun5330dw1, nsbc113epdxv6 http://onsemi.com 7 package dimensions h e dim min nom max millimeters a 0.50 0.55 0.60 b 0.17 0.22 0.27 c d 1.50 1.60 1.70 e 1.10 1.20 1.30 e 0.5 bsc l 0.10 0.20 0.30 1.50 1.60 1.70 0.020 0.021 0.023 0.007 0.009 0.011 0.059 0.062 0.066 0.043 0.047 0.051 0.02 bsc 0.004 0.008 0.012 0.059 0.062 0.066 min nom max inches sot?563, 6 lead case 463a issue f e m 0.08 (0.003) x b 6 5 pl a c ?x? ?y? notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeters 3. maximum lead thickness includes lead finish thickness. minimum lead thickness is the minimum thickness of base material. d e y 12 3 4 5 l 6 1.35 0.0531 0.5 0.0197 mm inches scale 20:1 0.5 0.0197 1.0 0.0394 0.45 0.0177 0.3 0.0118 *for additional information on our pb-free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* h e 0.08 0.12 0.18 0.003 0.005 0.007 on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other inte llectual property. a listing of scillc?s pr oduct/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent?marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typical s? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner. p ublication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5817?1050 dtc113ep/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loc al sales representative
|
